Jump to content


Get new downloads in your inbox each morning

If you want to be kept up to date on the latest downloads added to the site each day through your email, just pop your email address into our daily downloads service HERE.

"); //]]>
6
");

Bootable Flash drive possible?


17 replies to this topic



#11 Bob

Bob

    New Poster!

  • Members
  • 6 posts

    Posted 13 March 2012 - 05:24 PM

    Ok, I've downloaded Macrium Reflect and will make a disk image with it. Next, do I just put the image on the new drive and replace my existing hard drive with the new one? or is there more to it than that?

    When it gets to the blank screen, there is not a sound made, even though I have left the cursor blinking for a half hour. I thought that it might have been hung up but it wasn't. If I turn everything off for 5 minutes, it will then boot normally.

    Thanks to you guys for all the time you have taken to educate me. It's sure appreciated. Bob.


    #12 marko

    marko

      Platinum Poster!

    • Root Admin
    • 25,898 posts

      Posted 13 March 2012 - 08:36 PM

      Bob, not having a secondary drive I can't really be sure of the exact process and I'm not sure of the setup you have available to you. However, here's the possible scenario's from what I can assume are as follows.

      If you have not already installed your new hard-drive, then you may need to perform an image backup which goes to a CD/DVD - this essentially saves an image (or snapshot) of your computer as it is right now. You may then, additionally, be required to create a rescue disc or the rescue function may automatically be built in to the image creation process, can't be 100% sure of that one so maybe need to check that out beforehand.

      If, on the other hand, you are able to install the new hard drive in the machine (i.e. secondary drive, etc) then you could simply use the "clone disk" option in Reflect which would make an exact copy of your machine straight over to the new hard drive. Presumably, it's then simply a case of replacing the old HDD with the new one and voila !!.

      I thinkn our man Jimbo is more experienced with Reflect than myself, so he may be able to elaborate further or confirm the scenario above :)

      For now, here's a few video's which may help .....

      Creating an Image using Macrium Reflect


      Cloning a disk (i.e. two drives installed, copying one directly to the other)

      Please remember that we have people from many different timezones on the site and if your post requires a reply it could take longer at some at some points because of this.

      Forums
      New Freeware on the site
      Updated Freeware on the site
      RSS Subscribe
      Report bad freeware here

      #13 James (Jim) Hillier

      James (Jim) Hillier

        Platinum Poster!

      • Super Mod
      • 1,024 posts

        Posted 13 March 2012 - 10:07 PM

        Hey Bob - Macrium should ask you to create a bootable disc at first run. However, it you miss that step the option is always available under the menu item 'Other Tasks':
        Attached Image: MRF.png

        Image versus Clone: An image is a permanent copy of used sectors only, compressed and saved to external media (external USB drive is best). Cloning copies one drive directly to another including all space, used and unused - there is no external permanent copy created.

        Cloning is quicker and less complicated but also slightly riskier. If the cloning process fails, possibly due to faulty hard drive, you can end up with corrupted systems on both drives and nothing working or bootable. If you choose to use the cloning method, I would suggest also creating a full system image beforehand so you have a permanent backup copy of your original system to fall back on.

        NOTE: Make sure you 'Verify' the image after saving.

        Quote

        do I just put the image on the new drive and replace my existing hard drive with the new one? or is there more to it than that?
        That's pretty much all there is to it. Best method is to have both drives connected internally, format the new drive and allocate a drive letter. You can then restore an image or clone to the second drive from within Windows. Then simply remove the original drive and replace it with the new one.

        Quote

        If I turn everything off for 5 minutes, it will then boot normally
        Hmm, I think we should check the RAM. Download Memtest86 HERE. Burn the ISO to CD and boot from that. Memtest will start immediately, let it run for around 30 minutes and see if it reports any errors.

        If that is too complicated, try this: remove the RAM strips and clean the gold connecting strips with white spirit (metho will do nicely). If you have a can of compressed air handy you can also use that to clean out the female RAM connections on the motherboard. Reconnect the RAM strips and see if that makes any difference.

        One more question:is the computer fitted with a dedicated graphic card or is it using onboard graphics?

        Cheers...Jim
        Jim Hillier - Managing editor Daves Computer Tips.com

        #14 Bob

        Bob

          New Poster!

        • Members
        • 6 posts

          Posted 15 March 2012 - 01:09 AM

          It took me last night and most of today, but I created a bootable rescue disk using the Windows PE system. I saved the hard drive (C,D) image to my USB hard drive and verified it. Then I booted the rescue disk and made sure that I could access the USB drive and Macrium. So I believe that at this time I don't need to have a back-up hard drive on hand.
          I had a hard time understanding the difference between a clone and a disk image until Jim explained it. Marko your videos helped immensely, as I was stuck with which way to go.

          The RAM was also a challenge to test. It took 6 blank CDs (Nero just kept coping the .iso file to the CD without expanding it) before I downloaded CDBurnerXP and it made a bootable Memtest disk on the first try. I ran the program for the 30 minutes without any errors.

          Thank you both for all you time and trouble getting me on the right path, and as an aside Jim, I was born in Roma, and spent my early childhood on a station 2 hrs down a dirt road from Surat, Qld. Bob

          #15 Bob

          Bob

            New Poster!

          • Members
          • 6 posts

            Posted 22 March 2012 - 05:14 PM

            Attached Image: graphics.jpg Sorry that it took so long to get back with the graphics card info, but here it is:


            #16 jjj

            jjj

              Gold Poster!

            • Advanced Member
            • 83 posts

              Posted 23 March 2012 - 12:07 AM

              BOB - looking at your original post and the screenshot of your video card, it is possible that your problem is a video card issue rather than a boot up issue.
              It is possible your MB has on board video and has been replaced by this video card because usually there is just a black screen when a card goes- you can check by the number on the MB - or it can be one of a number of other hardware issues as stated in earlier posts.
              You can get a copy of the MB's diagnostics from the manufactures webpage and see from the beeps or number of diagnostic lights on the MB at which stage boot up fails.
              This will give a starting point to determine how to solve the issue.

              #17 Claw

              Claw

                Platinum Poster!

              • Advanced Member
              • 741 posts

                Posted 23 March 2012 - 01:57 AM

                Nice jjj,,that's food for thought Bob.

                #18 FutureShock

                FutureShock

                  Platinum Poster!

                • Advanced Member
                • 181 posts

                  Posted 23 March 2012 - 06:31 AM

                  Marko...thanks a billion times over for these videos. I'll be back to take a look at these at some point.

                  Don't think I'm going to go for Macrium until I have some hefty HDs. Machine came with a pair of identically sized HDs, but they aren't very big (250 GB). I developed a phobia somewhere about overloading HDs and decided that 20-25% would be my target max. Already at 36% on the main HD and the backup is at 20%. Have a USB too but it's half as big. Waitin for a payday to get some TB HDs in a new machine...



                  Similar Topics




                  0 user(s) are reading this topic

                  0 members, 0 guests, 0 anonymous users